After the long COVID lockdown, we're easing back into participating in our favourite hobby with a bit of a different event on July 9th. This one will primarily be for us to start doing some driving again as we test our cars and run some informal races for Kitbash and the new proposed Clubman class.
Because of the ongoing COVID threat, we're going to be implementing a few cautionary measures, as follows:
- Face masks are required (both nose and mouth must be covered).
- Hand sanitiser will be provided - please use on entry and whenever otherwise necessary.
- As much physical distancing as is practical. This doesn't have to be six feet, but don't be falling over one another.
- Regarding item 3 above, we will be implementing something to allow some distancing when driving. More info on this when you arrive.
- Kitbash - H&R Racing 14K or M/T-SL1 FF 14.7K motor; no traction magnets allowed; 1.0 mm minimum ground clearance under motor; 64 mm maximum outer track limit (left to right tyre edges).
- Clubman - 8mm maximum tread width; wheels and tyres must not be visible when viewing body from above; FC130 or FF up to 18K; no traction magnets allowed; 1.0 mm minimum ground clearance under motor; 55 mm maximum outer track limit (left to right tyre edges).
- All cars - must have racing numbers displayed at least on each side. Owners are encouraged to include other realistic-looking decoration on their cars, such as sponsor advertising and number roundels.
Don't forget to bring along some refreshments.
Reality Checks
Kitbash:
Ckubman:
See you on the circuit...
Gordon
