Racing this Thursday 17th Jan (HS, APC, VS6075)

All things related to racing at FRC
Post Reply
User avatar
gordon
Site Admin
Posts: 3018
Joined: Thu Feb 04, 2010 2:34 pm
Location: Trinidad & Tobago
Contact:

Racing this Thursday 17th Jan (HS, APC, VS6075)

Post by gordon »

Hi Guys,

FRC will be open for practice, testing and racing from 7:30 PM this Thursday (17th January) for our 2019 opening event where we'll be running our Group A classes - Historic Saloon (HS), American Pony Car (APC), Vintage Sports '60-'75 (VS6075).

We're going to try to start qualifying for the first class at 8:30 PM and get through all the races around 10:30 PM, so we're running this first event with two races per class (instead of three) and the races will be based on time instead of laps. Also, we're going to run our Vintage Sports GT and Prototype sub-classes as separate races. Here's the schedule:

Image

Key points to pass tech inspection:
  • Historic Saloon - Motor up to 18,000 RPM; USD rule. All magnets must be positioned ahead of centreline of the distance between guide flag pivot point and rear axle; Standard wheels; Angle-winder pods are prohibited; Body width may not exceed 60 mm.
  • American Pony Car - Motor up to 21,500 RPM; USD rule. All magnets must be positioned ahead of centreline of the distance between guide flag pivot point and rear axle; Standard wheels; Front tyre minimum diameter: 17mm on wheel. Rear tyre minimum diameter: 19mm on wheel. 8mm maximum tyre width.
  • Vintage Sports '60-'75 GT - Motor up to 18,000 RPM; USD rule. Magnets must be positioned within 40 mm and forward of the rear axle (this is the forward magnet position on a Slot.It motor pod); Any chassis is allowed. 90gm minimum weight.
  • Vintage Sports '60-'75 Prototype - Motor up to 22,500 RPM; USD rule. Magnets must be positioned within 40 mm and forward of the rear axle (this is the forward magnet position on a Slot.It motor pod); Any chassis is allowed. 77gm minimum weight.
  • All classes that stipulate the USD rule - Cars must drop away from a C7016 Scalextric Single Lane Half-straight 175mm that is held still (no shaking) in an upside-down position. Any weight added to the car must be positioned within 2.5" (64mm) and ahead of the rear axle.
You can see the 2018 class regulations here and the general racing regulations here.

Don't forget to bring along some refreshments.

Reality Checks

Historic Saloon:
Image

American Pony Car:
Image

Vintage Sports '60-'75:
Image

See you on the circuit...
Gordon
RameshB
Posts: 599
Joined: Tue Jan 15, 2013 12:30 pm

Re: Racing this Thursday 17th Jan (HS, APC, VS6075)

Post by RameshB »

Looking forward see you guys on Thursday.
steveaca
Posts: 1574
Joined: Mon Feb 08, 2010 1:12 pm

Re: Racing this Thursday 17th Jan (HS, APC, VS6075)

Post by steveaca »

Will be there for sure. I suspect we'll be seeing an Escort Mk.1 in those Alan Mann colours at the track !
User avatar
gordon
Site Admin
Posts: 3018
Joined: Thu Feb 04, 2010 2:34 pm
Location: Trinidad & Tobago
Contact:

Re: Racing this Thursday 17th Jan (HS, APC, VS6075)

Post by gordon »

steveaca wrote: Tue Jan 15, 2019 9:07 pm Will be there for sure. I suspect we'll be seeing an Escort Mk.1 in those Alan Mann colours at the track !
Steve, I suspect you're right ;)
Post Reply