TRIANGLE OF COMBUSTION.

Tips to help you get your cars to run better
Post Reply
Gregory
Posts: 23
Joined: Sun Jun 10, 2018 3:46 pm

TRIANGLE OF COMBUSTION.

Post by Gregory »

Food for thought: What does the triangle of combustion has to do with running-in (break-in) a new motor?

If you place the new motor in a jar 3/4 filled with methylated spirits, cover the jar tightly but leaving the motor-wires outside the jar, you can then run the motor at full for approximately (motor has to remain submerged) 2.5 to 3 minutes. This affords the brushes to conform and for the armature shaft (fore&aft) to wear-in without overheating, whilst the motor remains internally free from carbon deposits and airborne charged-particles. Remove the motor from the jar carefully (warm spirits) dry off by manually turning the shaft in front of a slow fan or hair dryer, allow to cool if necessary. Lubricate with your preferred lubricant (KY? lol sorry) run for half a minute without load at full. Ready for installation.
User avatar
gordon
Site Admin
Posts: 3017
Joined: Thu Feb 04, 2010 2:34 pm
Location: Trinidad & Tobago
Contact:

Re: TRIANGLE OF COMBUSTION.

Post by gordon »

Glad you posted this tip Richard. I have actually done this many times in the past, although not so much recently. Here's a pic on my workbench from some years ago:

Image
Post Reply