Page 1 of 5
BTCC Car Reservations
Posted: Fri Jul 26, 2019 9:05 am
by gordon
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 10:11 am
by steveaca
Let's see who will be first to register a VW Passat or an MG6 !
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:00 pm
by obrie
One little problem. The spec calls for cars from 2016 onwards. Steves car is a 2015. Need to change the reg i think
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:19 pm
by obrie
Maybe I am wrong about Steve’s car after all as I cant get his car on Scalextric site??? but the choice of 2016 eludes me. Why they year?
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:30 pm
by gordon
O'Brie wrote: ↑Fri Jul 26, 2019 5:19 pm
Maybe I am wrong about Steve’s car after all as I cant get his car on Scalextric site??? but the choice of 2016 eludes me. Why they year?
O'Brie, It was based on this Scalextric post (I figured they would have a good reason):
https://www.scalextric.com/uk-en/news/s ... J6,4TK6O,1
Remember, these are my "proposed" regs. There's always room for change.
So which car are you planning to get?
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:36 pm
by gordon
My initial research indicated that these cars raced in the BTCC from 2015, so the period should really be from 2015 onwards.
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:39 pm
by gordon
Just changed it to 2015.
Re: BTCC Car Reservations
Posted: Fri Jul 26, 2019 5:44 pm
by gordon
Steve's car on Scalextric site (it's no longer available):
https://www.scalextric.com/uk-en/btcc-b ... ies-1.html
Re: BTCC Car Reservations
Posted: Sat Jul 27, 2019 7:18 pm
by obrie
Yep 2015 is a good move. Thanks for assisting with the car this a.m. it was an early start to the day and I have been neglecting the boat. Looking forward to getting the car soon! Worked on the SB mini, rally and i have the F1 to do the magnets. Then on to the 250 GT and the Capri. Doubt I’ll get any further with Real F1 viewing as well
Re: BTCC Car Reservations
Posted: Sat Jul 27, 2019 7:27 pm
by obrie
Might i suggest that we do not allow the PCR chassis with slot it pod. We will end up with the same problems AGAIN!!!