03. American Pony Car
Posted: Mon Jul 25, 2022 4:23 pm
American Pony Car (APC)
(Last changed - Oct 2022)
For slot models of American "Pony Cars" that took place in the Trans-Am series between 1966 and 1972.
- Period: 1966-1972.
- Body: External fender modifications not allowed. Wheels and tyres must not be visible when viewing body from above. Windows may not be tinted.
- Chassis: Original, but may be modified provided guide flag position and axle positions remain unaltered. Angle-winder configurations not allowed.
- Interior: Should be as close to the original interior as possible. May be altered or replaced if necessary to install digital chip and/or to clear motor, but try to keep it as realistic as you can. No ultra-light lexan-type interiors allowed.
- Motor: Up to 21,500 RPM.
- Wheels: Either 12mm or 13mm in diameter (excluding the ridge).
- Tyres: Front: Free but must be no less than 17mm on wheel. Rear: Free but must be no less than 19mm on wheel. Rear tyre maximum tread width: 8mm (excluding sidewall).
Helpful link: Preparing a car for FRC's American Pony Car class